Lock-n-Load® Inserts make the job of installing inserts quick and easy! Now within seconds, you can install, index and lock your inserts in place without glue.

Precision, self-centering design improves concentricity by aligning to the center of the shaft resulting in better overall flight accuracy and arrow to arrow consistency. Easily index your blades to your vanes before locking the insert into place.

Simple locking mechanism allows you to remove and reuse your Lock-n-Loads on the range or in the field.

  • Easy set-up and installation. 5/64" Allen wrench included.

  • No messy glue!

  • Reuseable! Remove insert from damaged arrow shafts and use again and again.

  • Makes indexing and alignment of arrow vanes to broadhead blades a snap.

  • Improved overall arrow flight and trajectory.


Lock-n-Load 165 Hybrid Outsert

OVERVIEW

The Lock-n-Load 165 Hybrid Outsert is designed for micro diameter arrow shafts (.165 ID). It showcases our unique wedge-style self-centering, gripping mechanism. The Lock-n-Load 165 is called a Hybrid Outsert because of its unique design of gripping the inside of the shaft, but the tapered broadhead receiver extends out of the shaft. The insert is sized to accept a standard 8-32 threaded broadhead.  

SPECS

Weight: 50 grains

Material: Aluminum - 7075-T6

Fit: Micro Diameter shafts with a .165 ID (G series)

This list represents arrow shafts with a .165-.166 ID but may not be all inclusive. Consult your specific shaft specifications to determine inside diameter.

  • Black Eagle: Deep Impact
  • Easton: Injexion A/C, Injexion Carbon
  • Muddy Outdoors: HT-1
  • Victory: VAP

Lock-n-Load 204 Half-Out Insert

OVERVIEW

The Lock-n-Load 204 Half-Out Inserts are designed for slim arrows with a .204"ID such as the Easton FMJ or the Black Eagle Rampage. The Lock-n-Load 204 features our four-flange style self-centering, gripping mechanism which produces a tight fit. Like the Lock-n-Load 165, the 204 grips the inside sidewall of the arrow shaft, but with a shorter portion extending out of the shaft. The insert accepts standard 8-32 threaded broadhead or point.

SPECS

Weight: 22 grains

Material: Aluminum - 7075-T6

Fit: Slim shafts with a .204 ID (X series)

This list represents arrow shafts with a .204 ID but may not be all inclusive. Consult your specific shaft specifications to determine inside diameter.

  • Beman ICS: Team REALTREE® MFX™, Classic MFX™, BLACK MAX™, MAX-4™
  • Black Eagle: Rampage
  • Carbon Xpress: CX Edge, CX Edge Hunter
  • Easton: ST Axis, ST Axis real tree, A/C Super Slim, Axis Full Metal Jacket, ST Axis Full Metal Jacket Camo, ST Axis FMJ, ST Axis Realtree, ST Axis Mossy Oak Obsession, ST Axis, ST Axis Junior can also fit A/C/C 3-28/500
  • Gold Tip: Kinetic Hunter, Kinetic Pro, Kinetic XT
  • Trophy Ridge: Blast, Crush, Hailfire, Wrath

Lock-n-Load 244 Insert

OVERVIEW

Lock-n-Load 244 Inserts fits the standard "S" and "GT" and features our four-flange style self-centering, gripping mechanism, containing virtually the entire insert inside the shaft. It grips the inside sidewall of the arrow shaft - without glue. This insert is one of our lightest at just 17 grains, and like all Lock-n-Loads it accepts a standard 8-32 threaded broadhead. Easy set-up and installation. 5/64" Allen wrench included.

SPECS - Lock-n-Load 244

Weight: 18 grains

Material: Aluminum - 7075-T6

Fit: Carbon shafts with a .244"-.246" ID (S/GT)

This list represents arrow shafts with a .244" - .246" ID but may not be all inclusive. Consult your specific shaft specifications to determine correct ID.

  • Arrow Dynamic: .395 Mag
  • Beman: ICS Camohunter®, ICS Energy™, ICS Hunter Elite™, ICS Hunter™, ICS Camo Hunter™, ICS Hunter Junior™, ICS Venture™, ICS Speed
  • Black Eagle: Carnivore, Carnivore Ultra Lightweight
  • Cabelas: Carbon Hunter, Stalker Extreme Carbon, Outfitter Series
  • Carbon Xpress: AMPED-XS 30, Aramid KV, Carbon Rebel, Carbon Rebel Hunter, Heritage, MACH 5™, Maxima™, Maxima™ 3D Select, Maxima™ Blue Streak, Maxima™ Blue Streak Select, Maxima™ Hunter, Maxima™ Hunter KV, Mayhem™, Mayhem™ Hot Pursuit, Mayhem™ Hunter, Mutiny, Piledriver™, Piledriver™ Hunter, Predator II, Terminator Hunter, Terminator Lite, Terminator Lite Hunter, Terminator Lite Select, Terminator Select Hunter, Terminator XP, Thunderstorm, Thunderstorm SE, Whitetail
  • Carbon Impact: Stealth XLT, Trophy Hunter, Carbon youth
  • Carbon Tech: Cheetah, Panther, Rhino, Whitetail
  • Easton: Carbon Storm, Flatline Surgical™, Flatline™, LightSpeed, Lightspeed 3D, PowerFlight, Traditional Only®, Raider, Radier Platinum
  • Forge: Extreme Kevlon™
  • Gold Tip: Pro Hunter, XT Hunter, Expedition Hunter, Vapor Pro, Vapor Pro Hunter, Ultralight, Ultralight Pro, Ultralight Entrada, Falcon, Traditional, Big Game 100, Ted Nugent
  • Harvest Time Archery: HT-2
  • High Country: Speed Pro
  • High Impact: Penetrator
  • PSE: Carbon Force, X-Weave, X-Weave Pro
  • Red Head: Carbon Fury, Carbon MAX2, Carbon Maxx, Carbon Hunter, Carbon Supreme, Carbon Supreme Lite
  • Vapor: Predator, Predator Pro, Hunter, Hunter Pro, Pro Black, Pro Whitetail, Whitetail, Carbonwood, Wayne Carlton Signature, Vapor Jets
  • Victory: V-Force, V-Force HV

Lock-n-Load 300 Brass Inserts

92 Grain & 112 Grain

Lock-n-Load 300 Inserts are designed for standard crossbow shafts with a .300 inside diameter. They features our four-flange style gripping mechanism with an aggressive knurling for an extremely tight, self-centering fit. The Lock-n-Load 300 is available in both 92 grain or 112 grain and both accept an 8-32 threaded broadhead.

SPECS

Weight: 92 or 112 grains
Material: Brass

Fit: Crossbow Bolts with .300” – 0.309” ID

Consult your specific shaft manufacturer's specifications to determine inside diameter.